FrogLine – Overhead Mounted Steel Mount Intermediate Anchor

OVERHEAD MOUNTED LIFELINE FROGLINE - STEEL INTERMEDIATE

Product Code: STAT.FROGSTE004

What am I used for?

A horizontal lifeline system designed to be mounted into steel construction. Intermediate anchor designed to be mounted into steel structures to limit lifeline span distances.

Patented low profile design.
Advanced shock absorbing serpentine.
Constructed entirely of stainless steel.
Equipped with an engineered energy absorbing region to minimise loads on users and structures in the event of a fall.
Intended for use with 8mm stainless steel cables.
Quick connect shuttle.
Smooth transition over intermediates.
The FrogLine has been rigorously tested and manufactured in accordance with Australia and New Zealand Standard AS/NZS 1891.2, American Standard ANSI Z359.6-2009, European Standards EN 795:2012 and CEN/TS 16415:2013.

Product Information

OVERHEAD LIFELINE FROGLINE STEEL

SafetyLink designs and manufactures height safety roof anchors and horizontal lifeline systems which provides restraint and fall arrest safety for all residential / commercial / industrial building sites, from a series of roof anchor points to a complete network of systems for maintenance, cleaning, access and inspections where working at heights.

The FrogLine lifelines low profile design combines effortless energy absorbing capabilities into every intermediate, and end anchor, consequently incorporating the line energy absorbers into the system. This inventive approach ensures our overhead mounted FrogLine lifelines are always installed with the maximum energy absorption possible regardless of the horizontal line length.

Innovation and attention to detail is always foremost in our minds when designing new products. The FrogLine lifeline demonstrates this with its intricate tab features. These tabs provide stability whilst the line is in tension, in addition to this they act as a fall indicator when removed from their initial position.

Designed with a variety of interchangeable components, the FrogLine is capable of being installed into a multitude of situations including metal roof sheeting, purlins, steel beams and concrete structures.

The FrogLine has been rigorously tested and manufactured in accordance with Australia and New Zealand Standard AS/NZS 1891.2 and European EN 795:2012, CEN/TS 16415:2013.

Product Components

Components

Product Code	Product Description
FROGLINE INT_OH	FrogLine Base Intermediate OVERHEAD (316SS)
BOLT-M16x50mm-SS	Bolt: M16x50mm Set Screw 316SS
WASHER M16_Spring_316	Washer: M16 Spring 316SS
WASHER M16_316	Washer: M16 316SS
NUT M16_316	Nut: M16 316SS

The building or structure for the anchorages must be assessed by an engineer, unless it is clear to a competent person that the structure is adequate.

Maximum user per system is Four (4).
Maximum person per span is Two (2).
See system information for site specific use.