PERMANENT LADDER SYSTEM - Ladder lifeline – Bolted (Retro fit)

Product Code: LADER001.22
What am I used for?
  • Vertical Lifeline is designed to be retro fitted to the stiles on an existing ladder, used as a fall arrest system.
  • Designed for single person use (except in emergency situations), rated for max 150kg.
  • SafetyLink ladders are manufactured to AS 1657 Standards.
  • Ladder should be only used for access. If it is intended to work from a ladder, the work should be light duty and short duration.
  • Three points of contact with the ladder should be maintained on the ladder at all times. For example, two feet one hand, one
    foot and two hands, two feet and the frontal D ring on a fall arrest harness attached to the fall arrest line.

Product Information
PERMANENT LADDERS
  • Vertical Lifeline is designed to be retro fitted to the stiles on an existing ladder, used as a fall arrest system.
  • Designed for single person use (except in emergency situations), rated for max 150kg.
  • SafetyLink ladders are manufactured to AS 1657 Standards.
  • Ladder should be only used for access. If it is intended to work from a ladder, the work should be light duty and short duration.
  • Three points of contact with the ladder should be maintained on the ladder at all times. For example, two feet one hand, one
    foot and two hands, two feet and the frontal D ring on a fall arrest harness attached to the fall arrest line.
Product Components
Components
Product CodeProduct DescriptionQuantity
LADER001:.22Ladder Eyebolt Mounting Bracket1

SafetyLink’s Permanent Ladder System shall be subject to periodic inspections and certification. Inspection and certified must be carried out every 12 months or less if required by a regulator. These inspections must be completed by a competent person. For inspection requirements refer to SafetyLink’s Installation Handbooks and Certification Checklists.

Load ratings: The vertical fall arrest is rated as a one person usage, 15kN.

Menu