Tuff Post is designed to raise the height of a height safety system using a 600mm. Intermediate anchor designed to limit lifeline span distances. Longer tube to enable bending to suit small degree changes in the line.
TUFF POST is designed to raise the height of a height safety system using either a 300mm or 600mm Tuff Post.
TUFF POST is a sealed unit made entirely from stainless steel. Designed to be submerged into garden beds, water and other mediums.
The TUFF POST can be installed into steel or concrete structures. All our TUFF POSTS are designed to install onto minimum 150mm concrete slab thickness, which cater to local and global building designs/structures.
The TUFF POST when installed with a lifeline is used with SafetyLink’s energy absorbing FrogLine Lifeline. The FrogLine Lifeline has advanced shock absorbing serpentines designed into each anchor with innovative built-in fall indicators. Therefore reducing the load off the structure and the person in the event of a fall.
Continuous connection with 8mm stainless steel cable, utilising the FrogLine Shuttle System, up-to four users per system, two per span.
| Product Code | Product Description | Quantity |
|---|---|---|
| FROGLINE INT_EXT | FrogLine Base Intermedaite Extended | 1 |
| BOLT-M16x35mm-SS | Bolt: 16mm x 35mm Set Screw | 1 |
| WASHER M20 | Washer: 20mm | 1 |
| O-RING | O-Ring Washer | 1 |
| TUFF-POST600 | Tuff Post 600mm | 1 |
| CON-M16x160 | Anchor Rod M16X160, Nut, Spring Washer & Washer | 4 |
The building or structure for the anchorages must be assessed by an engineer, unless it is clear to a competent person that the structure is adequate.
Maximum user per system is Four (4).
Maximum person per span is Two (2).
See system information for site specific use.
