Tuff Post is designed to raise the height of a height safety system using a 600mm. End anchor designed to be mounted into a concrete structure as attachment points for the cable to start and terminate at.
TUFF POST is designed to raise the height of a height safety system using either a 300mm or 600mm Tuff Post.
TUFF POST is a sealed unit made entirely from stainless steel. Designed to be submerged into garden beds, water and other mediums.
The TUFF POST when installed with a lifeline is used with SafetyLink’s energy absorbing FrogLine Lifeline. The FrogLine Lifeline has advanced shock absorbing serpentines designed into each anchor with innovative built-in fall indicators. Therefore reducing the load off the structure and the person in the event of a fall.
Continuous connection with 8mm stainless steel cable, utilising the FrogLine Shuttle System, up-to four users per system, two per span.
| Product Code | Product Description | Quantity |
|---|---|---|
| FROGLINE END | FrogLine Base End | 1 |
| BOLT-M16x35mm-SS | Bolt: 16mm x 35mm Set Screw | 1 |
| WASHER M20 | Washer: 20mm | 1 |
| O-RING | O-Ring Washer | 1 |
| TUFF-POST600 | Tuff Post 600mm | 1 |
| CON-M16x160 | Anchor Rod M16X160, Nut, Spring Washer & Washer | 4 |
The building or structure for the anchorages must be assessed by an engineer, unless it is clear to a competent person that the structure is adequate.
Maximum user per system is Four (4).
Maximum person per span is Two (2).
See system information for site specific use.
