Whilst in a safe work position install the Fox Brake Block into a suitable position so it will remain above the users head height at all times.
NOTE: The Fox Brake Block utilises bolts/nuts that are made from 304 stainless steel for long life in the outdoors. The inherent issue with this material is that if over tightened/loaded they may become “seized”, if this happens the bolt will not loosen. To prevent this issue “Nickel anti-seize” has been put on all threads. This should not be removed during installation and when the unit is taken apart in the future fresh anti-seize will need to be applied (petroleum jelly will do the same job).
It is advisable to use a clamp to aid in the installation of these bolts to prevent the seizing of these bolts/nuts.
Ensure that the bolts/ nuts are tightened evenly from both sides of the mounting bracket, this will give an even distribution of load to the threads. Be careful NOT TO OVER TIGHTEN.
The Fox Brake Block components are paired and therefore fit together smoothly in their pairs. When installing ensure pairs are re-assembled the same way as to result in an exact fit.
The Fox Brake Block is now ready for use with a suitable brake system.
We recommend regular inspections for wear/damage and rotation of the block to aid in maximum lifespan.